|
SPECIFICATION |
| STRUCTURE : |
Column Pillar Foundation with R.C.C. beams, Slabs, etc.
All outer walls should be Double Brick Work in c.m.1:5
All inner walls shall be Single Brick Work in c.m.1:4
All external walls shall be of Plastered Finish. |
| FLOORING : |
All rooms shall have Vitrified Tiles flooring and skirting.
Glazed tiles shall be provided in toilet walls concept design upto height of 7'0" and flooring shall be provided antiskit.
Glazed tiles shall be provided on kitchen wall upto height of 2'6" from the kitchen platform.
Staircases shall be finished with Anti Skit Tiles. |
| DOORS : |
Entrance door shall be in Teak Wood with frame and varnished shutter.
All doors and window frames shall be made out of Padak Wood.
All internal doors shall be provided water Proofing - Molded Flush doors.
Powder Coated steel fixtures shall be used for all door fittings (Johnson Make).
Bathroom Doors shall be provided with Sintex doors. |
| WINDOWS : |
Windows shall be provided with Padak Wood Glazed Shutters.
In toilets Fixed Lowered Ventilators shall be provided..
All windows and ventilators shall have Enamel Painted Mild Steel Grills. |
|
KITCHEN : |
Kitchen platform shall be polished in Black Granite Slab with Stainless Steel Sink |
| SANITARY WARE & PLUMBING : |
Colour European Water Closet (EWC) provided in attached toilet and Indian water closet (IWC) provided in common toilet (Johson)
All plumbing line shall be of Concealed type.
All taps and showers shall be of Johnson Company product. |
| LOFTS : |
Concrete lofts shall be provided in kitchen and bedrooms. Cub-boards shall be provided in bedroom, kitchen, dining, wherever poss
Wood work for lofts and cub-boards would be Provided at extra cost. |
|
FINISHES : |
Internal surface shall be finished with two coats of putty with Emulsion paint in hall and other rooms only emulsion paint
External surface shall be finished with ACE Emulsion Paint. |
| WATER SUPPLY: |
A Sump to receive metro water and bore water shall be provided.
An Overhead Tank of sufficient capacity to store bore water and metro water in separate compartments shall also be provided.
Metro water meter will be provided. |
| WIRING : |
All wiring are Concealed suitable for 3-Phase supply. A/C wiring provision in bedroom
All wiring shall have copper conductor and adequate routing for lighting and power loads.
Separate energy meter shall be given to each apartment in meter room located at ground floor. Distribution board shall be provided
each apartment for easy isolation of supply.
Common services shall have separate meters.
15-A plug shall be provided in kitchen and toilets.
Inverter with batteries having 1000 Watts power shall be provided at extra cost if required. |
| COMMON FEATURES : |
All open area shall be paved with Cement Tiles.
Entrance and Exit gate shall be provided.
Common areas, staircases and compound shall be with Adequate light points.
Sump shall be constructed. |
| ADDITIONAL FEATURES : |
The following additional features are not included in the amenities.
Electrical fittings or Electrical Appliances
Shelving, Pelmets, cup-board shutters
Close line kitchen cabinet
Grill work for balconies |
